Vertex Standard VX-1400 Spezifikationen PDF herunterladen (Seite 23)

21VX-1400 OPERATING MANUAL

frequency (receive frequency vs transmission frequency) will appear on the display.

 Press the

[



]

[



]

(move the digit) and

[



]

[



]

(select the number) button to im-

prove the sound of the incoming signal. These

buttons functions does not affect your transmis-

sion frequency; only the receive frequency is

being adjusted (up to ±1.000 kHz). Press and hold in both

[



]

and

[



]

buttons for

one second to reset the offset.

Important Note: The transceiver can not transmit while adjusting the clarifier offset.

If you wish to transmit, press the

[

CLAR

]

button again to return to normal display.

 Press the

[

CLAR

]

button again to return to normal display. When the receiving fre-

quency is higher than displayed frequency, the

“” icon will appear in the upper side of the

frequency display. Similarly, when the receiv-

ing frequency is lower than displayed frequency, the “” icon will appear in the

upper side of the frequency display.

Important Note: Keep offset frequency until you change the operating frequency or

reset the offset by pressing and holding both

[



]

and

[



]

buttons for one second.

 If the LCD display is too bright, press the

[

DIM

]

button (the

[

PROGRAMMABLE

]

button

which assigns the “Dimmer” function: the factory default is

[

]

button) to reduce

the display brightness. Press the

[

DIM

]

button again return to the LCD display to

nominal brightness level.

 Press the Programmable Function

([

]

[

], [

]

[

])

buttons to activate the

function which is corresponding with that button. Refer to page 42 for the details of

the Programmable Function button.

RECEPTION

OPERATION

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Vertex Standard VX-1400 Spezifikationen Seite 23

Kommentare zu diesen Handbüchern