Vertex Standard VX-1400 Spezifikationen PDF herunterladen (Seite 8)

VX-1400 OPERATING MANUAL6

DC IN 13.8V

This is the main DC power input jack for the VX-1400.

ANT Jack

This PL-259 (“M” Type) connector is used for connection of the coaxial feedline

from the antenna. When the optional FC-30 or FC-40 External Antenna Tuner is

used, the RF interconnection cable from the FC-30 or FC-40 connects here, while

the antenna wire or whip connects to the FC-30 or FC-40.

GND Terminal Post

Use this terminal to connect the transceiver to a good earth ground bus, for safety and

optimum performance. Use a large diameter, short braided cable.

TUNER Jack

This 8-pin mini-DIN jack is for interconnection to the optional FC-30 or FC-40

External Antenna Tuner.

EXT SP Jack

This 3.5-mm miniature phone jack provides receiver audio output for an external

speaker. Available audio output is 10 Watts, and the permitted impedance is 4 to 16

Ohms. Inserting a plug into this jack automatically disables the internal speaker.

Caution: Do not connect this line to ground, and be certain that the speaker has

adequate capability to handle the audio output from the VX-1400.

ACC Out

This hole which is blocked by the rubber cap is a hole to draw the optional CT-139

Accessory Cable.

REAR PANEL CONNECTIONS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

Keine Kommentare

Vertex Standard VX-1400 Spezifikationen Seite 8