Vertex Standard VX-1400 Spezifikationen PDF herunterladen (Seite 17)

15VX-1400 OPERATING MANUAL

BASE STATION INSTALLATION

DC Power Connections

For base station installations, Vertex Standard recommends the use of the optional FP-

1030A AC Power Supply. The FP-1030A provides a regulated 13.8 V DC supply at up to

25-Ampere.

Other models of DC power supplies may be used with the VX-1400, but the 13.8 V DC

input voltage, 23-Ampere current capability, and DC cable polarity guidelines described

previously must be strictly followed.

 If you are connecting the FP-1030A with the VX-1400 for the first time, before

connecting power check the label in the rear of the FP-1030A which indicates the

AC mains voltage for which the supply is currently set.

CAUTION! Permanent damage can result if improper supply voltage is applied to this trans-

ceiver. Your warranty does not cover damage caused by application of AC, reversed polar-

ity DC, or DC outside of the specified range of 13.8 V ±15%. If using a power supply

other than the FP-1030A, ensure that the DC supply connector to the transceiver matches

the VX-1400 wiring configuration. Other manufacturers may utilize power supplies with

a physically matched connector that is wired differently; this will cause serious damage to

the VX-1400 transceiver!

INSTALLATION

Supplied DC Cable

005510 2015 3020 40

CONTINUOUS CURRENT 25A

OVERLOAD

POWER

OFF

FP-1030A

VX-1400

RED BLACK

FUSE: 25A

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Keine Kommentare

Vertex Standard VX-1400 Spezifikationen Seite 17