Page 1GX2360SQUANTUM GX2360S25 Watt VHF/FMMarine TransceiverOwner's Manual Oversized alphanumeric LCD, knobs and keys Large 2.8 inch internal l
GX2360SPage 102 PACKING LISTWhen the package containing the transceiver is first opened, please check itfor the following contents: GX2360S QUANTUM
Page 11GX2360S4 INSTALLATION4.1 LOCATIONThe radio can be mounted at any angle. Choose a mounting location that:• is far enough from any compass to a
GX2360SPage 122. Connect the red power wire to a 13.8 VDC ±20% power source. Connectthe black power wire to a negative ground.3. If an optional remote
Page 13GX2360S4.4 CONNECTION OF GPS WITH NMEA OUTPUTAdditional Information:• The GPS must have the NMEA Output turned on and set to 4800 Baud inthe s
GX2360SPage 144.5 CHECKING GPS CONNECTIONSAfter connections have been made between the QUANTUM and the GPS, asmall satellite icon will appear on the
Page 15GX2360S4.7 CHANGING COG TO TRUE OR MAGNETICAllows customizing the NAV data showing GPS Course Over Ground (COG).Factory default is True howeve
GX2360SPage 164.8 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION1. Make a rectangular template for the flush mount measuring 2-27/32” H x8-5/64” W (72 x 20
Page 17GX2360S4.9 OPTIONAL ENHANCED RAM+ SECOND STATION MIC INSTALLATIONThe QUANTUM is capable of using up to 2 Enhanced RAM+ mics to remotelycontrol
GX2360SPage 185 CONTROLS AND INDICATORSNOTEThis section defines each control of the transceiver. See Figure 4 forlocation of controls. For detailed o
Page 19GX2360SDISTRES SPULL OPENVOL/PWRSQLCALLPA/FOGSCANMEMDWICNAVMENUSETA/BWX16/9QUANTUMGX2360SH/LFigure 4. Controls and Connectors
GX2360SPage 2TABLE OF CONTENTSSAFETY/WARNING INFORMATION ... 4FCC RADIO LICENS
GX2360SPage 20[WX] KeyImmediately recalls the previously selected NOAA weather channel fromany channel.Secondary use1. Holding down the [16/9] key whi
Page 21GX2360S[MEM] KeyMemorizes the selected channel into the transceivers scan memory forscanning. When pressed again, it DELETES the channel from t
GX2360SPage 22CHANNEL SELECTOR KNOBRotary knob used to select channels and to choose menu items (such as theDSC menu, radio setup and DSC setup menu).
Page 23GX2360S6 BASIC OPERATION6.1 PROHIBITED COMMUNICATIONSThe FCC prohibits the following communications:• False distress or emergency messages:•
GX2360SPage 246.4 TRANSMIT TIME - OUT TIMER (TOT)When the PTT switch on the microphone is held down, transmit time is limited to5 minutes. This limit
Page 25GX2360S1. Program NOAA weather channels into the transceiver’s memory for scan-ning. Follow the same procedure as for regular channels under se
GX2360SPage 26other distinguishing marks. The total transmission should not exceed 1minute.9. End the message by saying “OVER”. Release the microphone
Page 27GX2360S6.12 MAKING TELEPHONE CALLSTo make a radiotelephone call, use a channel designated for this purpose, Thefastest way to learn which chan
GX2360SPage 283. To stop scanning, press the [SCAN], [16/9], [WX],[CALL/SET(MENU)], or PTT key.6.15 MEMORY SCANNING (M-SCAN)NOTEDuring scanning, the
Page 29GX2360S6.17 CHANNEL A /B PRESET CHANNELSTwo calling channels (used by an organization or a favorite channel) can bepreset. But USA channels 9
Page 3GX2360S7 DIGITAL SELECTIVE CALLING ... 357.1 GENERAL ...
GX2360SPage 306.18 PA/FOG OPERATIONPA/FOG mode allows the transceiver to be used as a 30W hailer when anoptional STANDARD HORIZON 220SW or 240SW PA h
Page 31GX2360S1. Press the [PA/FOG] key, then select “FOG” with theCHANNEL selector knob.2. Press the [CALL/SET(MENU)] key.3. Turn the CHANNEL selecto
GX2360SPage 326.21 INTERCOM OPERATIONIf the RAM+ Mic is connected to the QUANTUM, you may communicate be-tween the QUANTUM and RAM+ Mic, or RAM+ Mic
Page 33GX2360S6.22.1 Communication1. Press and hold the [DW(IC)] key while in the “RA-DIO” mode, the mode is changed to “INTERCOM”mode.2. If your QUA
GX2360SPage 346.22 VOICE SCRAMBLERIf privacy of communications is desired, a CVS2500 voice scrambler (VS) canbe installed in the transceiver. Contact
Page 35GX2360S7 DIGITAL SELECTIVE CALLING7.1 GENERALWARNINGThis radio is designed to generate a digital maritime distress and safetycall to facilita
GX2360SPage 367.2.2 Programming the MMSIWARNINGUser MMSI can be input only twice. If the user tries to input MMSI morethan twice, the radio will show
Page 37GX2360S3. Press the [CALL/SET(MENU)] key, then select “DSCSCAN” with the CHANNEL selector knob.4. Press the [CALL/SET(MENU)] key.5. Turn the CH
GX2360SPage 385. If an acknowledgement is received, select channel16 and advise your distress situation.6. If no acknowledgment is received, the distr
Page 39GX2360S7.6 ALL SHIPS CALLThe All Ships Call function allows contact to be established with other vesselstations without having their ID in the
GX2360SPage 4SAFETY / WARNING INFORMATIONThis radio is restricted to occupational use, work related operations only wherethe radio operator must have
GX2360SPage 407.6.2 Receiving an All Ships Call1. When an all ships call is received, an emergencyalarm sounds.The radio will automatically change to
Page 41GX2360S[CALL/SET(MENU)] key to move to the next space.This method can also be used to enter a blank spacein the name. To clear the previous let
GX2360SPage 42lected setting.7. To exit this menu and return to radio operation modepress the [16/9] key.7.7.3 Setting up Individual Call RingerWhen
Page 43GX2360Swill transmit again.7. After the second INDIVIDUAL CALL is transmitted,if the reply signal is not received, the dot matrix areaof the LC
GX2360SPage 441. Press and hold down the [CALL/SET(MENU)] keyuntil “RADIO SETUP” menu appears.2. Turn the CHANNEL selector knob to select “DSCSETUP” m
Page 45GX2360Sreference in the directory.7. Press the [CALL/SET(MENU)] key to store the firstletter in the name.8. Repeat step 6 and 7 until the name
GX2360SPage 468. After the GROUP CALL is transmitted, all the radiosin the group will switch to the designated channel.9. Listen to the channel to mak
Page 47GX2360S7.8.2.1 Setting up Position ReplyThe QUANTUM can be set up to automatically or manually send your positionto another vessel. This select
GX2360SPage 486. After a DSC position request is transmitted, the trans-ceiver remains on channel 70 until position data isreceived from the polled ve
Page 49GX2360S7.8.3 Position SendThe feature is similar to Position Request, however instead of requesting aposition of another vessel this function
Page 5GX2360SFCC RADIO LICENSE INFORMATIONStandard Horizon radios comply with the Federal Communication Commission(FCC) requirements that regulate the
GX2360SPage 508 RADIO SETUPNOTEThe optional RAM+ MIC CMP25 can also change the SETUP menu.Refer to page 60 for details.8.1 LAMP ADJUSTINGAllows sett
Page 51GX2360S8.3 TIME OFFSETSets the time offset between local time and UTC (time GPS sends to radio).Time is displayed when GPS position (LAT/LON)
GX2360SPage 528.4 KEY BEEP (ON/OFF)This selection allows the beep tone when a key is pressed to be turned off.1. Press and hold down the [CALL/SET(ME
Page 53GX2360S8.6 VOICE SCRAMBLER(Operates only when the optional CVS2500 is installed)This menu is used to setup the channels to be scrambled and th
GX2360SPage 548.7 CHANNEL NAMINGThis selection allows you to customize the name of a channel from the defaultname.1. Press and hold down the [CALL/SE
Page 55GX2360S8.8 TRUE MAGNETIC CHANGE (NAV display)Allows customizing the GPS COG (Course Over Ground) displayed on the LCDto be in True or Magnetic
GX2360SPage 569 ENHANCED RAM+ MIC OPERATIONWhen the RAM+ microphone is connected to the QUANTUM, most VHF, DSC,setup menus and PA modes can be remote
Page 57GX2360SPOWER SWITCH (PWR)Press and hold down this key to turn to the transceiver and RAM+ Mic onand off.PTT (Push-To-Talk) SWITCHActivates tran
GX2360SPage 58Watches for a transmission on CH16 and another selected channel untileither signal is received. (Dual watch)NOTE: When the DSC SCANNING
Page 59GX2360Sand advise your distress situation.6. If no acknowledgment is received, the distress call isrepeated in 4 minute intervals until an ackn
GX2360SPage 6FCC NOTICENOTICEUnauthorized changes or modifications to this equipment may void com-pliance with FCC Rules. Any change or modification m
GX2360SPage 609.3 DSC/RADIO SETUP MODEThe RAM+ can access the DSC / RADIO setup menu (refer to section 7 “DSC/RADIO SETUP” for details). However, th
Page 61GX2360S10 MAINTENANCEThe inherent quality of the solid-state components used in this transceiver willprovide many years of continuous use. Tak
GX2360SPage 6210.2 FACTORY SERVICEIn the unlikely event that the radio fails to perform or needs servicing, pleasecontact the following:Standard Hori
Page 63GX2360SSYMPTONTransceiver fails topower up.Transceiver blows fusewhen connected topower supply.Popping or whiningnoise from the speakerwhile en
GX2360SPage 6411. CHANNEL ASSIGNMENTSTables on the following columns list the VHF Marine Channel assignments forU.S.A. and International use. Below a
Page 65GX2360S6. Marine vessels equipped with VHF radios are required to monitorChannel 16.VHF MARINE CHANNEL CHARTCH U C I S/D TX RX CHANNEL USE01 X
GX2360SPage 66VHF MARINE CHANNEL CHARTCH U C I S/D TX RX CHANNEL USE23 X X D 157.150 161.750 Public Correspondence (Marine Operator)23A X S 157.150 U.
Page 67GX2360SVHF MARINE CHANNEL CHARTCH U C I S/D TX RX CHANNEL USE75 X S 156.775 Port Operations (Inter-ship only) (1W)76 X S 156.825 Port Operation
GX2360SPage 681: 156.050 MHz and 156.175 MHz are available for port operations and commercial com-munications purposes when used only within the U.S.
Page 69GX2360S4: Use of 156.875 MHz is limited to communications with pilots regarding the movementand docking of ships. Normal output power must not
Page 7GX2360SGETTING STARTEDABOUT VHF RADIOThe radio frequencies used in the VHF marine band lie between 156 and 158MHz with some shore stations avail
GX2360SPage 7012. WARRANTYMarine Products Limited WarrantySTANDARD HORIZON (a division of VERTEX STANDARD) warrants, to theoriginal purchaser only, e
Page 71GX2360Sparts and subassemblies. Parts thus repaired or replaced are warranted for thebalance of the original applicable warranty.STANDARD HORIZ
GX2360SPage 72Some states do not allow the exclusion or limitation of incidental or consequen-tial damages, or limitation on how long an implied warra
Page 73GX2360S13 SPECIFICATIONSPerformance specifications are nominal, unless otherwise indicated, and aresubject to change without notice.13.1 GENE
GX2360SPage 74MEMO
Page 75GX2360SMEMO
GX2360SPage 76Copyright 2003VERTEX STANDARD CO., LTD.All rights reserved.No portion of this manualmay be reproducedwithout the permission ofVERTEX STA
GX2360SPage 8COAXIAL CABLEVHF antennas are connected to the transceiver by means of a coaxial cable –a shielded transmission line. Coaxial cable is sp
Page 9GX2360S1 GENERAL INFORMATION1.1 INTRODUCTIONThe STANDARD HORIZON QUANTUM is a VHF/FM transceiver designed foruse in the frequency range of 156
Kommentare zu diesen Handbüchern