Vertex Standard VX-800 Bedienungsanleitung PDF herunterladen (Seite 2)

Note that your dealer may have made provision for “Talk Around”

channels by programming “repeater” and “Talk Around” frequencies

on two adjacent channels. If so, the key may be used for one of the

other Pre-Programmed Functions.

Scan A/D

The Add/Del feature allows the user to arrange a custom Scan.

Press (or Press and hold) the assigned Programmable key to delete/

restore the current channel to/from your scanning list.

When you delete a stored channel, the “

” icon will, in turn disap-

pear. When you restore a channel, the “

” icon will now appear.

Phone

Your Dealer may have pre-programmed Auto-Dial telephone number

memories into your radio.

To dial a number, just press (or Press and hold) the Dealer-assigned

Programmable key for Speed Dialing. The DTMF tones sent dur-

ing the dialing sequence will be heard in the speaker.

Call/Reset

Press (or Press and hold) the assigned Programmable key to silence

the receiver and reset for another call (when your communication is

finished).

Call 1/Call 2

Press (or Press and hold) the assigned Programmable key to send a

5-tone sequential tone group which is pre-defined.

Call Up/Call Down

Press (or Press and hold) the assigned Programmable key to select a

5-tone encode code from the pre-defined encode list.

Code Set

Press (or Press and hold) the assigned Programmable key to change

the encode digits for 5-tone operation. To change a specific digit, se-

lect the desired digit using the

[

]

key, then change thenumber using

the

[

]

[

]

keys, and store the number using the

[

]

key.

Emergency

The VX-420A Series

(

LTR

)

includes an “Emergency” feature, which

may be useful, if you have someone monitoring on the same frequency

as your transceiver’s channel. For further details contact your VER-

TEX STANDARD dealer.

Home

Press (or Press and hold) the assigned Programmable key to recall

the pre-programmed Home system/group. When you recall the Home

system/group, the “H” icon will appear on the display.

Press (or Press and hold) the assigned Programmable key again to

return to previous system/group; the “H” icon will disappear on the

display.

Home Set

Press (or Press and hold) the assigned Programmable key to store

the current system/group to the Home register.

Short-cut GP-1, GP-2, GP-3, GP-4

Press (or Press and hold) the assigned Programmable key to recall

the Dealer pre-programmed System/Group directly.

Continuous System Up, Down

Press and hold the assigned Programmable key causes the radio to

begin stepping (repeatedly) upward or downward through the Sys-

tems.

Continuous Group Up, Down

Press and hold the assigned Programmable key causes the radio to

begin stepping (repeatedly) upward or downward through the Groups.

System Up, Down

Press (or Press and hold) the assigned Programmable key to switch

to a higher (or lower) System.

Once the desired System is reached, rotate the System/Group knob

to select the desired System/Group within the selected System.

Group Up, Down

Press (or Press and hold) the assigned Programmable key to switch

to a higher (or lower) operating Group number.

Monitor

Press (or Press and hold) the assigned Programmable key to disable

the Signaling Squelch (CTCSS, DCS, 5-Tone Signaling, or DTMF

Pager). Again press (or Press and hold) the assigned Programmable

key to resume normal (quiet) the Signaling Squelch action.

When the Signaling Squelch is disabled, the “

” icon will be indi-

cated on the display.

NSQ

Press and hold the assigned Programmable key to disable both the

Noise and Signaling Squelch (CTCSS, DCS, 5-Tone Signaling, or DTMF

Pager) systems. Again press and hold the assigned Programmable

key to resume normal (quiet) operation of the Noise and Signaling

Squelch system.

When the Signaling Squelch is disabled, the “

” icon will be indi-

cated on the display.

TX Low Power

Press (or Press and hold) the assigned Programmable key to set the

radio’s transmitter to the “Low Power” mode, thus extending battery

life. Press (or Press and hold) the assigned Programmable key again

to return to “High Power” operation when in difficult terrain.

When the radio’s transmitter is set to “Low Power” mode, the “L”

icon will be indicated on the display.

Key Lock

Press (or Press and hold) the assigned Programmable key to lock

the Programmable keys (except Lock, Emergency, Monitor, Light-

ing, and NSQ keys); thus, the

[

]

[

]

[

]

, and

[

]

keys can be dis-

abled to prevent radio settings from being disturbed. In the Lock mode,

the display will show “LOCK” when you rotate the System/Group

selector knob or touch a Programmable key.

Lighting

Press (or Press and hold) the assigned Programmable key to illumi-

nate the LCD for five seconds.

Scan

The Scanning feature is used to monitor multiple channels programmed

into the transceiver. While scanning, the radio will check each channel

for the presence of a signal, and will stop on a channel if a signal is

present.

Ì To activate scanning:

Press (or Press and hold) the assigned Programmable key.

The scanner will search the channels, looking for active ones; it

will pause each time it finds a channel on which someone is speak-

ing.

Ì To stop scanning:

Press (or Press and hold) the assigned Programmable key.

Operation will revert to the channel to which the System/Group

knob is set.

Talk Around

Press (or Press and hold) the assigned Programmable key to acti-

vate the Talk Around feature when you are operating on duplex chan-

nel systems (separate receive and transmit frequencies, utilizing a “re-

peater” station). The Talk Around feature allows you to bypass the

repeater station and talk directly to a station that is nearby. This fea-

ture has no effect when you are operating on “Simplex” channels, where

the receive and transmit frequencies are already the same.

When the “TA” function is activated, the “TA ON” notation will be

appeared on the display.

DESCRIPTION OF OPERATING FUNCTIONSKEY FUNCTIONS

The VX-420A Series

(

LTR

)

provides programmable

[

]

[

]

[

]

[

]

function keys and programmable

[

]

and

[ ]

switches.

These

Programmable keys functions can be customized (set to

other functions), via programming by your VERTEX STANDARD

dealer, to meet your communications/network requirements. Some fea-

tures may require the purchase and installation of optional internal

accessories. The possible Programmable key programming features

are illustrated below, and their functions are explained in the next chap-

ter. For further details, contact your VERTEX STANDARD dealer.

For future reference, check the box next to each function that has been

assigned to the Programmable key on your particular radio, and

keep it handy.

[

]

/--

Function

System Up

System Down

Group Up

Group Down

Monitor

NSQ

TX Low Power

Key Lock

Lighting

Scan

Talkaround

Scan A/D

Phone

Call/Reset

Call 1

Call 2

Code Up

Code Down

Code Set

Emergency

Home

Home Set

Short-cut to GP 1

Short-cut to GP 2

Short-cut to GP 3

Short-cut to GP 4

Continuous System Up

Continuous System Down

Continuous Group Up

Continuous Group Down

[

]

/--

[

]

/--

[

]

/--

[

Side 1

]

/--

[

Side 2

]

/--

Programmable key

(

Press/Press and Hold

)

ARTS

(

UTO RANGE TRANSPOND SYSTEM

)

This system is designed to inform you when you and another ARTS-

equipped station are within communication range.

During ARTS operation, your radio automatically transmits for about

1 second every 25 or 55 seconds in an attempt to shake hands with the

other station.

If you have out of range for more than two minutes, your radio senses

that no signal has been receives, a ringing beeper will sound, and

“GROU OUT” will appear on the LCD. If you subsequently move

back into range, as soon as the other station transmits, your beeper

will sound and “GROU IN” will appear on the LCD.

DTMF PAGING SYSTEM

(

REQUIRES FVP-25 OPTIONAL BOARD

)

This system allows paging and selective calling, using DTMF tone

sequences.

When your radio is paged by a station bearing a tone sequence which

matches yours, your radio’s squelch will open and the alert will sound.

The three-digit code of the station which paged you will be displayed

on your radio’s LCD.

ACCESSORIES & OPTIONS

FNB-V57 7.2 V 1100 mAh Ni-Cd Battery

FNB-V57IS Intrinsically-Safe 7.2 V 1100 mAh Ni-Cd Battery

FNB-V67LIA 7.4 V 2300 mAh Lithium-Ion Battery

FNB-83 7.2 V 1400 mAh Ni-MH Battery

FNB-V94 7.2 V 1800 mAh Ni-MH Battery

FBA-25A Alkaline Battery Case

VAC-10 Desktop Rapid Charger

(for

FNB-V57/-V57IS/-83/-V94

)

VAC-800 Desktop Rapid Charger (for

FNB-V57/-V57IS

)

VAC-810 Desktop Rapid Charger (for FNB-V67LIA)

VAC-6800 6-unit Multi Charger (for

FNB-V57/-V57IS

)

VAC-6810 6-unit Multi Charger (for

FNB-V67LIA

)

MH-45

B4B

Speaker/Microphone

MH-37

A4B

Earpiece Microphone

VC-25 VOX Headset

VCM-1 Mobile Mounting Bracket (for VAC-800/-810)

FVP-25 DTMF pager Unit

ATU-6D Rubber Antenna 450-490 MHz

ATV-6XL Untuned Antenna 134-174 MHz

ATV-8C Rubber Antenna 161-174 MHz

CE47 Programming Software

FIF-12 USB Programming Interface

CT-27A Radio to Radio Cloning Cable

CT-28 Programming Cable (for CT-29)

CT-29 RS-232C Programming Interface Cable

CT-106 Programming Cable (for FIF-12)

WARRANTY POLICY

Vertex Standard warrants, to the original purchaser only, its Vertex

Standard manufactured communications products against defects in

materials and workmanship under normal use and service for a given

period of time from the date of purchase.

Limited Warranty Details:

 North America customers (USA and Canada):

http://www.vertexstandard.com/lmr/warranty-terms.aspx

 Customers outside of North America:

Contact the authorized dealer in your country.

Vertex Standard LMR, Inc.

No portion of this manual

may be reproduced

without the permission of

Vertex Standard LMR, Inc.

Printed in China

Vertex Standard LMR, Inc.

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Vertex Standard VX-800 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radios Vertex Standard VX-800